| PublicationDate: 7/14/2000 Summary: Corrections to Recent SSCR Network Message Author: PSS - Program Systems Service Posted on July 14, 2000 TO: All Destination Points FROM: CPS Customer Service RE: Corrections to Recent SSCR Network Message CPS Customer Service recently sent a network message providing instructions for making changes to the File Management setup in the SSCR for Windows software. We have identified several typographical errors in this message we wish to communicate to you: 1) "MESSAGETB" is mispelled in the first paragraph; the file is actually called MESSAGTB. 2) The second paragraph indicates the File Management setup is located under the Tools menu. To access the File Management setup, you actually need to click on the Tools menu, then select Setup, then click on File Management. 3) The third paragraph reads "On the Exports tab in the File Name column, change the file name SSCM99IN.* to SSCMXXIN.*. Also, change the file name SSCR99IN.* to SSCRXXIN.*." This paragraph should have read "On the Exports tab in the File Name column, change the file name SSCM99IN.DAT to SSCMXXIN.DAT. Also, change the file name SSCR99IN.DAT to SSCRXXIN.DAT." 4) In the fourth paragraph, the message states "Change the file name SSCR99OP.* to SSCRXX.*." This should have read "Change the file name SSCR99OP.* to SSCRXXOP.*." CPS Customer Service apologizes for any confusion these errors may have caused. If you have questions about this message, or if you have question about making these changes in your SSCR for Windows software, please contact CPS Customer Service at 800/330-5947, option 5, or via email at CPS@NCS.COM. |